News

News

Page 6 of 8
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
17/12/12 Salt saturation project concludes

Roperhurst have completed our most recent installation of a salt saturator, dust arrestor tank and associated pipework into a large industrial site in South Wales.

Read more
17/09/12 PVC/GRP vessels fabricated to BS4994 Category 1

Roperhurst is in the final stages of a project to fabricate and install a series of PVC/GRP vessels built to BS4994 Category 1, using welders certified to BS EN 13067.

Read more
23/08/12 Production unit ventilated

Our client is a leading edge player in the carbon nanotechnology market.  They approached Roperhurst with a project to install air filtration and recirculation into their new production facility, complete with safe-change capability.

Read more
15/05/12 Major ductwork project completed

Following a major fire, our client faced a race against time to get its facilities back up and running.  Roperhurst was tasked with not only replacing 150m ductwork ranging from 1500mm diameter downwards, but also to offer up a solution which not only retained its chemical resistant properties but which also offered additional defence against fire in the future.

Read more
24/04/12 Engineering humour

We had a very positive response to our earlier post of jokes we had heard about engineers.  So...

Read more
01/03/12 HVCA becomes B&ES

On Thursday 1 March the HVCA became B&ES - the Building & Engineering Services Association. Over 90 per cent of the membership voted to change the name at a special general meeting held in London on Thursday 8 December, following a major consultation exercise.

Read more
06/01/12 PVC/GRP ductwork for the water treatment industry

The new year got off to a flying start with an order on Christmas Eve to supply 200m of PVC/GRP ductwork and fittings in a range of sizes to a waste water treatment works on the East Coast of England.

Read more
30/09/11 Roperhurst burns rubber at the 2011 away day

In the 2011 Roperhurst away day, twelve members of staff took part in a karting Grand Prix, which included practice and qualifying sessions before a 20 minute race to decide who could race fastest without fear.

Read more
30/08/11 Major fabrication project nears completion in the Czech Republic

Roperhurst's international division has returned from the Czech Republic following completion of a major pickle line tank fabrication.

Working to a very tight timescale, Roperhurst's engineers, alongside colleagues from the Czech Republic and the US, fabricated a tank for a European steelworks to replace one destroyed by fire earlier in the year.

Read more
12/07/11 Roperhurst invests in ILEVE

Three members of Roperhurst's management team have joined the newly formed Institute of Local Exhaust Ventilation Engineers (ILEVE)

ILEVE is being developed under the umbrella of CIBSE (The Chartered Institution of Building Service Engineers) and aims to provide a higher profile and focus for Local Exhaust Ventilation Engineers within CIBSE.

Read more
Page 6 of 8
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8